Manual seats

For information on how to adjust the front head restraint
Do not adjust the seat while the vehicle is moving; doing so could cause a loss of vehicle control and personal injury.
Electric seats

To adjust the seats, the Smart key must be inside the vehicle.
For information on how to adjust the front head restraints
Do not adjust the seat while the vehicle is moving; doing so could cause a loss of vehicle control and personal injury.
Restricted front seat travel
If seat movement stops unexpectedly during adjustment, check for and remove any obstructions.
Once any obstructions have been removed, the seat adjustment mechanism can be reset as follows: Operate the button again to continue the stalled adjustment. When seat movement resumes, hold the button until the end of travel in that direction has been reached.
Seat adjustment can now be carried out as normal.
Note: If no obstructions can be seen, but normal adjustment cannot be carried out without stalling, contact your Retailer/ Authorised Repairer.
The driver and front seat passenger must not ride with the seat fully reclined.
Do not adjust the seat while the vehicle is moving.
The seat, head restraint, seat belt and airbags, all contribute to the protection of the user. Correct use of these components will give you greater protection. Therefore, you should always observe the following points:

To achieve optimum benefit of the seat belt in the event of an accident, do not recline the seat excessively.
Make sure that your driving position is comfortable and enables you to maintain full control of the vehicle.
DRIVING POSITION MEMORY
The front seat and exterior mirror positions can be saved to the vehicle's memory.
Once you have adjusted the poweroperated driver's seat and the exterior mirrors, the vehicle can memorise the settings for future use.

Note: A seat position will be saved to the memory, only during the 5 second active period.
Note: Any existing settings will be over-written when a new position is saved to the memory.
To recall a saved position, press the relevant preset button (1, 2 or 3).
Memory (1, 2 or 3) Recalled will be displayed in the Message centre.
EASY ENTRY/EXIT
When Easy entry/exit is enabled, the driver's seat will automatically lower when the ignition is switched off and the door is opened. Upon returning to the vehicle, when the driver's door is closed and the ignition is switched on, the seat will return to its previously set position.
This feature can be enabled/disabled via the Instrument panel menu.